Hot Posts

6/recent/ticker-posts

How to Fix the common Windows 11 Wi-Fi DHCP Issue

Windows 11 users have reported issues with Dynamic Host Configuration Protocol (DHCP), causing Wi-Fi connectivity problems. DHCP is responsible for assigning IP addresses automatically, and when it fails, devices may struggle to obtain an IP, leading to limited or no internet access. This guide provides practical solutions to fix the Windows 11 Wi-Fi DHCP issue.

The Windows 11 Wi-Fi DHCP issue can be frustrating, but following these troubleshooting steps should resolve the problem. If DHCP issues persist, contacting your internet service provider (ISP) or reinstalling Windows 11 might be necessary.


1. Restart Your Router and PC

Before diving into advanced troubleshooting, restart your router and Windows 11 device. Sometimes, temporary network glitches can be resolved with a simple reboot.

2. Ensure DHCP is Enabled

  • Check Network Adapter Settings
  • Press Win + R, type ncpa.cpl, and hit Enter.
  • Right-click your active Wi-Fi network and select Properties.
  • Double-click Internet Protocol Version 4 (TCP/IPv4).
  • Ensure Obtain an IP address automatically and Obtain DNS server address automatically are selected.

Click OK and restart your PC.

3. Restart the DHCP Client Service

  • Press Win + R, type services.msc, and hit Enter.
  • Find DHCP Client, right-click it, and select Restart.
  • If the service is stopped, right-click, choose Properties, and set Startup type to Automatic.
  • Click Apply, then OK.

4. Release and Renew IP Address

  • Using the Command Prompt, release and renew your IP configuration:
  • Open Command Prompt as Administrator.
  • Type the following commands one by one:
  • ipconfig /release
  • ipconfig /renew

Restart your PC and check if the issue persists.

5. Disable and Re-enable the Network Adapter

  • Press Win + X and select Device Manager.
  • Expand Network adapters and find your Wi-Fi adapter.
  • Right-click it and choose Disable device.
  • Wait a few seconds, then right-click and select Enable device.
  • Reconnect to your Wi-Fi and check if DHCP is working.

6. Update or Roll Back Network Drivers

  • Update Drivers
  • Open Device Manager and expand Network adapters.
  • Right-click your Wi-Fi adapter and select Update driver.
  • Choose Search automatically for drivers.
  • Roll Back Drivers
  • If the issue started after an update, right-click your Wi-Fi adapter in Device Manager.
  • Select Properties > Driver.
  • Click Roll Back Driver if the option is available.
  • Restart your PC and check the connection.

7. Reset Network Settings

If none of the above solutions work, reset network settings:

  • Open Settings (Win + I).
  • Go to Network & Internet > Advanced network settings.
  • Click Network reset, then Reset now.
  • Restart your PC and reconnect to Wi-Fi.

Post a Comment

0 Comments